What FD60 fire doors in Heywood should include
Our FD60 fire doors service in Heywood is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Heywood range from light industrial buildings to schools and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For FD60 work in Heywood we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Heywood buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
On a typical job that means:
- Check of the fire strategy rating for each opening
- 60-minute glazing systems where vision panels are needed
- Load-rated hinges and correctly powered closer
- Intumescent and smoke seals as specified
What the rules say for Heywood
In Heywood, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Heywood building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs FD60 fire doors in Heywood?
Typical settings for FD60 fire doors include mixed-use commercial buildings, refuse stores and stair cores in taller blocks. In Heywood, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Heywood
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Heywood building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Heywood and nearby
Heywood is about 12.5 km from Manchester, and we cover both, along with nearby Middleton and Rochdale. Send us your postcode and we'll confirm survey dates.
Common questions
Is Heywood within your coverage area?
It is. We cover Heywood in Greater Manchester and neighbouring towns such as Middleton. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.