FD60 fire doors in Hazel Grove, done to the evidence
We provide FD60 fire doors in Hazel Grove (SK2 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Hazel Grove, fire door work covers everything from care homes to small offices. We plan each job around the people who use the building.
For FD60 work in Hazel Grove we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Hazel Grove buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
On a typical job that means:
- Frame fixing and structural gap sealing recorded with photos
- Certified FD60 doorset or leaf with matching evidence
- Check of the fire strategy rating for each opening
- Load-rated hinges and correctly powered closer
Rules and responsibilities in Hazel Grove
The rules that apply to fire doors in Hazel Grove are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Hazel Grove block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs FD60 fire doors in Hazel Grove?
You are most likely to need FD60 fire doors if you look after mixed-use commercial buildings, plant and boiler rooms or refuse stores. Whatever the building in Hazel Grove, we survey each opening and tell you which doors need work and which do not.
How a Hazel Grove job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Hazel Grove
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Hazel Grove building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Hazel Grove and neighbouring towns
Nearby towns we cover include Stockport, Cheadle Hulme and Hyde. Distance from Hazel Grove does not change our guide prices, and the survey and quote are free.
Questions from Hazel Grove
Do you work in Hazel Grove?
Yes, we take on FD60 fire doors in Hazel Grove and the surrounding area, including Stockport and Cheadle Hulme. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Hazel Grove?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.