FD60 fire doors: our service in Peterlee
From the SR8 postcode district outwards, we take on FD60 fire doors across Peterlee for homes, blocks and workplaces.
Fire doors in Peterlee protect escape routes in family homes after loft conversions, light industrial buildings and small offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
FD60 openings in Peterlee buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Peterlee we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
As standard, the work covers:
- Intumescent and smoke seals as specified
- Frame fixing and structural gap sealing recorded with photos
- Load-rated hinges and correctly powered closer
- Check of the fire strategy rating for each opening
The regulations behind fire doors in Peterlee
The rules that apply to fire doors in Peterlee are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Peterlee block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Peterlee
You are most likely to need FD60 fire doors if you look after plant and boiler rooms, refuse stores or mixed-use commercial buildings. Whatever the building in Peterlee, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Peterlee
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Peterlee as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Peterlee
Nearby towns we cover include Seaham, Hartlepool and Houghton-Le-Spring. Distance from Peterlee does not change our guide prices, and the survey and quote are free.
Common questions
Is Peterlee within your coverage area?
It is. We cover Peterlee in County Durham and neighbouring towns such as Seaham. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.