FD60 fire doors: our service in Durham
If you need FD60 fire doors in Durham, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Durham range from houses with integral garages to small blocks of flats and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Before ordering FD60 doors for a Durham building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Durham we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
Each installation includes:
- Frame fixing and structural gap sealing recorded with photos
- Intumescent and smoke seals as specified
- 60-minute glazing systems where vision panels are needed
- Certified FD60 doorset or leaf with matching evidence
Which fire door rules apply in Durham?
In Durham, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Durham building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Durham need FD60 fire doors?
Typical settings for FD60 fire doors include mixed-use commercial buildings, refuse stores and stair cores in taller blocks. In Durham, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Durham
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Durham
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Durham building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Durham
We also cover towns near Durham, including Chester-le-Street (9.1 km away), Houghton-Le-Spring and Stanley. If your building is in DH1 or a neighbouring district, the service and pricing are the same.
Questions from Durham
Do you cover DH1 and nearby postcodes?
Yes. We cover Durham including DH1, and nearby towns such as Chester-le-Street and Houghton-Le-Spring. The survey and written quote are free.
What happens on a survey in Durham?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.