FD30 fire doors: our service in Peterlee
We provide FD30 fire doors in Peterlee (SR8 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Peterlee protect escape routes in family homes after loft conversions, care homes and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Each FD30 leaf we supply for Peterlee is sized for the opening, rather than trimmed beyond what its certification allows. In Peterlee, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
What you get:
- Fire-tested hinges, latch or lock and intumescent pads
- Survey of the opening, frame and existing ironmongery
- Certified FD30 or FD30S leaf, or full doorset
- Overhead closer set to close and latch
What the rules say for Peterlee
In Peterlee, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Peterlee building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where FD30 fire doors fit in Peterlee
Landlords, managing agents, facilities teams and homeowners in Peterlee can all commission FD30 fire doors from us. The usual settings are shops and HMOs, though single doors for care homes are just as welcome.
How a Peterlee job runs
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Budgeting for FD30 fire doors in Peterlee
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Peterlee building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Peterlee
We also cover towns near Peterlee, including Seaham (8.8 km away), Hartlepool and Houghton-Le-Spring. If your building is in SR8 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover SR8 and nearby postcodes?
Yes. We cover Peterlee including SR8, and nearby towns such as Seaham and Hartlepool. The survey and written quote are free.
What happens on a survey in Peterlee?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.

