FD60 fire doors for Cornwall buildings
Our FD60 fire doors service runs throughout Cornwall. Main towns include Redruth, Falmouth and St Austell, and we cover the smaller places in between.
Before ordering FD60 doors for a Cornwall building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. FD60 openings in Cornwall buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
Managing agents, landlords, schools, care providers, businesses and homeowners in Cornwall can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
Which fire door rules apply in Cornwall?
The rules that apply to fire doors in Cornwall are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Cornwall block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
The steps on a Cornwall installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Cornwall
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Cornwall building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Common questions
Do you provide FD60 fire doors across Cornwall?
Yes. We cover all of Cornwall, including Redruth and Falmouth. Surveys and written quotes are free.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.