FD60 fire doors: our service in Newquay
For property owners, landlords and managing agents in Newquay, we offer FD60 fire doors with one team for the survey, the product and the installation.
Newquay has a broad mix of buildings, including light industrial buildings, care homes and schools, and the same fire door principles apply to all of them.
FD60 openings in Newquay buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Newquay we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
On a typical job that means:
- 60-minute glazing systems where vision panels are needed
- Frame fixing and structural gap sealing recorded with photos
- Intumescent and smoke seals as specified
- Check of the fire strategy rating for each opening
The regulations behind fire doors in Newquay
In Newquay, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Newquay building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Which buildings in Newquay need FD60 fire doors?
Landlords, managing agents, facilities teams and homeowners in Newquay can all commission FD60 fire doors from us. The usual settings are refuse stores and plant and boiler rooms, though single doors for mixed-use commercial buildings are just as welcome.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Newquay
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Newquay and neighbouring towns
Nearby towns we cover include Truro, St Austell and Redruth. Distance from Newquay does not change our guide prices, and the survey and quote are free.
Common questions
Do you cover TR7 and nearby postcodes?
Yes. We cover Newquay including TR7, and nearby towns such as Truro and St Austell. The survey and written quote are free.
What happens on a survey in Newquay?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.