What FD60 fire doors in Flint should include
If you need FD60 fire doors in Flint, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Flint protect escape routes in small blocks of flats, family homes after loft conversions and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
FD60 openings in Flint buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Flint we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
On a typical job that means:
- 60-minute glazing systems where vision panels are needed
- Certified FD60 doorset or leaf with matching evidence
- Frame fixing and structural gap sealing recorded with photos
- Check of the fire strategy rating for each opening
What the rules say for Flint
Because Flint is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.
England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Flint comes from your fire risk assessment.
Who needs FD60 fire doors in Flint?
Typical settings for FD60 fire doors include refuse stores, plant and boiler rooms and stair cores in taller blocks. In Flint, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Flint
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Flint
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Flint building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Flint and nearby
Nearby towns we cover include Deeside, Buckley and Heswall. Distance from Flint does not change our guide prices, and the survey and quote are free.
Questions from Flint
Do you work in Flint?
Yes, we take on FD60 fire doors in Flint and the surrounding area, including Deeside and Buckley. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Flint?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.