FD60 fire doors: our service in Macclesfield
We provide FD60 fire doors in Macclesfield (SK11 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Macclesfield, fire door work covers everything from industrial estates to HMOs. We plan each job around the people who use the building.
FD60 openings in Macclesfield buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Macclesfield we generally fit certified doorsets, so frame and leaf share the same test evidence.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
As standard, the work covers:
- Frame fixing and structural gap sealing recorded with photos
- Load-rated hinges and correctly powered closer
- Certified FD60 doorset or leaf with matching evidence
- Intumescent and smoke seals as specified
Fire door law for Macclesfield properties
The rules that apply to fire doors in Macclesfield are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Macclesfield block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs FD60 fire doors in Macclesfield?
From refuse stores to stair cores in taller blocks, the requirement for FD60 fire doors in Macclesfield comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
How a Macclesfield job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Macclesfield
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Macclesfield building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Macclesfield and neighbouring towns
We also cover towns near Macclesfield, including Wilmslow (10.3 km away), Congleton and Cheadle Hulme. If your building is in SK11 or a neighbouring district, the service and pricing are the same.
Questions
Is Macclesfield within your coverage area?
It is. We cover Macclesfield in Cheshire and neighbouring towns such as Wilmslow. There is no charge for the survey.
How quickly can you survey in Macclesfield?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.