FD60 fire doors in Bedfordshire, done to the evidence
Across Bedfordshire, from Luton to Bedford, we survey, supply and fit FD60 fire doors for homes, blocks of flats and workplaces.
Before ordering FD60 doors for a Bedfordshire building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Bedfordshire we generally fit certified doorsets, so frame and leaf share the same test evidence.
Bedfordshire has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
Fire door law for Bedfordshire properties
Fire doors in Bedfordshire fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Bedfordshire above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
The steps on a Bedfordshire installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Bedfordshire
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Bedfordshire building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Questions
Do you provide FD60 fire doors across Bedfordshire?
Yes. We cover all of Bedfordshire, including Luton and Bedford. Surveys and written quotes are free.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.