FD30 fire doors in Lowestoft: what's involved
If you need FD30 fire doors in Lowestoft, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Lowestoft protect escape routes in high-street shops, schools and HMOs alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In Lowestoft, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Lowestoft is sized for the opening, rather than trimmed beyond what its certification allows.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
As standard, the work covers:
- Intumescent strips and smoke seals to the certification
- Certified FD30 or FD30S leaf, or full doorset
- Survey of the opening, frame and existing ironmongery
- Overhead closer set to close and latch
What the rules say for Lowestoft
The rules that apply to fire doors in Lowestoft are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Lowestoft block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where FD30 fire doors fit in Lowestoft
You are most likely to need FD30 fire doors if you look after shops, HMOs or care homes. Whatever the building in Lowestoft, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Lowestoft?
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Lowestoft
Lowestoft is about 61.5 km from Ipswich, and we cover both, along with nearby Great Yarmouth and Norwich. Send us your postcode and we'll confirm survey dates.
Questions
Do you cover NR32 and nearby postcodes?
Yes. We cover Lowestoft including NR32, and nearby towns such as Great Yarmouth and Norwich. The survey and written quote are free.
How quickly can you survey in Lowestoft?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.

