FD30 fire doors in Hythe

FD30 fire doors: our service in Hythe

From the SO45 postcode district outwards, we take on FD30 fire doors across Hythe for homes, blocks and workplaces.

Buildings in and around Hythe range from schools to small blocks of flats and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

In Hythe, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Hythe is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

On a typical job that means:

• Photo record, product data and certificate references at handover
• Survey of the opening, frame and existing ironmongery
• Intumescent strips and smoke seals to the certification
• Overhead closer set to close and latch

The regulations behind fire doors in Hythe

The rules that apply to fire doors in Hythe are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Hythe block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Buildings and duty holders in Hythe

The need for FD30 fire doors usually arises in schools or care homes, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Hythe to keep escape routes protected throughout.

How a Hythe job runs

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Hythe

Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Hythe building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Hythe and neighbouring towns

Hythe is about 4.9 km from Southampton, and we cover both, along with nearby Totton and Eastleigh. Send us your postcode and we'll confirm survey dates.

Common questions