FD30 fire doors in Fareham

What FD30 fire doors in Fareham should include

We provide FD30 fire doors in Fareham (PO16 and the surrounding postcodes), from the first survey through to a documented handover.

Fareham has a broad mix of buildings, including care homes, light industrial buildings and family homes after loft conversions, and the same fire door principles apply to all of them.

In Fareham, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Fareham, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.

What does a correct FD30 installation include?

A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.

Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.

What you get:

• Survey of the opening, frame and existing ironmongery
• Overhead closer set to close and latch
• Frame-to-wall gap sealed with an evidenced material
• Intumescent strips and smoke seals to the certification

What the rules say for Fareham

England's framework applies in Fareham. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Fareham, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Who needs FD30 fire doors in Fareham?

The need for FD30 fire doors usually arises in HMOs or shops, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Fareham to keep escape routes protected throughout.

Our process in Fareham

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Fareham

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Fareham and neighbouring towns

Neighbouring towns such as Gosport, Portsmouth, Waterlooville and Cowes are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Fareham