FD30 fire doors in Edinburgh & the Lothians: what's involved
For FD30 fire doors anywhere in Edinburgh & the Lothians, one team handles the survey, supply, installation and handover, covering Edinburgh, Livingston, Musselburgh and the rest of the county.
Each FD30 leaf we supply for Edinburgh & the Lothians is sized for the opening, rather than trimmed beyond what its certification allows. In Edinburgh & the Lothians, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
Edinburgh & the Lothians has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
What the rules say for Edinburgh & the Lothians
Edinburgh & the Lothians is in Scotland, which has its own system. Building work, including many fire door replacements, is governed by the Building (Scotland) Regulations 2004 and the Technical Handbooks, with Section 2 covering fire; where a building warrant is needed it comes from the local authority. In non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 set the duties.
The common parts of private blocks of flats largely sit outside Part 3 of the 2005 Act, so the fire risk assessment and housing obligations usually drive fire door work in residential buildings in Edinburgh & the Lothians.
From enquiry to handover in Edinburgh & the Lothians
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Edinburgh & the Lothians?
As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Edinburgh & the Lothians building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
FD30 fire doors questions
Do you provide FD30 fire doors across Edinburgh & the Lothians?
Yes. We cover all of Edinburgh & the Lothians, including Edinburgh and Livingston. Surveys and written quotes are free.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.
How long does it take to fit an FD30 door?
A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.