FD30 fire doors in Eastbourne

What FD30 fire doors in Eastbourne should include

We provide FD30 fire doors in Eastbourne (BN21 and the surrounding postcodes), from the first survey through to a documented handover.

Eastbourne has a broad mix of buildings, including GP surgeries, schools and care homes, and the same fire door principles apply to all of them.

For a mixed portfolio in Eastbourne, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Eastbourne is sized for the opening, rather than trimmed beyond what its certification allows.

What does a correct FD30 installation include?

A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.

Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.

On a typical job that means:

• Overhead closer set to close and latch
• Fire-tested hinges, latch or lock and intumescent pads
• Certified FD30 or FD30S leaf, or full doorset
• Frame-to-wall gap sealed with an evidenced material

The regulations behind fire doors in Eastbourne

Fire doors in Eastbourne fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Eastbourne above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Who needs FD30 fire doors in Eastbourne?

Landlords, managing agents, facilities teams and homeowners in Eastbourne can all commission FD30 fire doors from us. The usual settings are HMOs and schools, though single doors for blocks of flats are just as welcome.

How a Eastbourne job runs

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Budgeting for FD30 fire doors in Eastbourne

Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Eastbourne as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Around Eastbourne

We also cover towns near Eastbourne, including Hailsham (10.6 km away), Seaford and Bexhill-on-Sea. If your building is in BN21 or a neighbouring district, the service and pricing are the same.

Questions