FD30 fire doors in Bexhill-on-Sea: what's involved
We provide FD30 fire doors in Bexhill-on-Sea (TN40 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Bexhill-on-Sea protect escape routes in schools, light industrial buildings and small offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
In Bexhill-on-Sea, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Bexhill-on-Sea is sized for the opening, rather than trimmed beyond what its certification allows.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
What you get:
- Intumescent strips and smoke seals to the certification
- Certified FD30 or FD30S leaf, or full doorset
- Photo record, product data and certificate references at handover
- Fire-tested hinges, latch or lock and intumescent pads
The regulations behind fire doors in Bexhill-on-Sea
The rules that apply to fire doors in Bexhill-on-Sea are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Bexhill-on-Sea block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Bexhill-on-Sea need FD30 fire doors?
Landlords, managing agents, facilities teams and homeowners in Bexhill-on-Sea can all commission FD30 fire doors from us. The usual settings are HMOs and care homes, though single doors for offices are just as welcome.
What happens after you enquire
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Bexhill-on-Sea?
Budget around £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. Our guide prices are the same in Bexhill-on-Sea as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Bexhill-on-Sea and nearby
Neighbouring towns such as Hastings, Hailsham, Eastbourne and Seaford are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you cover TN40 and nearby postcodes?
Yes. We cover Bexhill-on-Sea including TN40, and nearby towns such as Hastings and Hailsham. The survey and written quote are free.
Can you work from an existing inspection report for my Bexhill-on-Sea building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.