FD30 fire doors in Billingham

FD30 fire doors: our service in Billingham

We provide FD30 fire doors in Billingham (TS23 and the surrounding postcodes), from the first survey through to a documented handover.

In and around Billingham, fire door work covers everything from schools to small offices. We plan each job around the people who use the building.

Each FD30 leaf we supply for Billingham is sized for the opening, rather than trimmed beyond what its certification allows. In Billingham, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

What you get:

• Intumescent strips and smoke seals to the certification
• Frame-to-wall gap sealed with an evidenced material
• Survey of the opening, frame and existing ironmongery
• Photo record, product data and certificate references at handover

Fire door law for Billingham properties

England's framework applies in Billingham. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Billingham, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Who needs FD30 fire doors in Billingham?

The need for FD30 fire doors usually arises in schools or blocks of flats, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Billingham to keep escape routes protected throughout.

What happens after you enquire

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Prices for FD30 fire doors in Billingham

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Billingham building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Billingham and neighbouring towns

Nearby towns we cover include Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees. Distance from Billingham does not change our guide prices, and the survey and quote are free.

Questions from Billingham