FD30 fire doors in Wilmslow, done to the evidence
When you book FD30 fire doors in Wilmslow, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
In and around Wilmslow, fire door work covers everything from small blocks of flats to light industrial buildings. We plan each job around the people who use the building.
Each FD30 leaf we supply for Wilmslow is sized for the opening, rather than trimmed beyond what its certification allows. In Wilmslow, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.
What does a correct FD30 installation include?
A typical timber FD30 leaf is around 44mm thick and hangs on at least three fire-tested hinges. The gaps between leaf and frame are set to the manufacturer's data, usually around 3mm. Intumescent strips, and smoke seals where needed, go in the frame or leaf edge as specified. The closer must pull the door shut and latch it from any angle. Every hole cut for a lock, latch or hinge is lined with intumescent material where the certification calls for it.
Then comes the part that is often skipped: sealing the gap between the frame and the wall with a tested material, as BS 8214:2026 now sets out in more detail.
On a typical job that means:
- Survey of the opening, frame and existing ironmongery
- Photo record, product data and certificate references at handover
- Fire-tested hinges, latch or lock and intumescent pads
- Frame-to-wall gap sealed with an evidenced material
Rules and responsibilities in Wilmslow
Fire doors in Wilmslow fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Wilmslow above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs FD30 fire doors in Wilmslow?
Typical settings for FD30 fire doors include care homes, offices and schools. In Wilmslow, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Wilmslow installation
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Wilmslow
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Wilmslow and neighbouring towns
Nearby towns we cover include Cheadle Hulme, Hazel Grove and Altrincham. Distance from Wilmslow does not change our guide prices, and the survey and quote are free.
Questions from Wilmslow
Do you work in Wilmslow?
Yes, we take on FD30 fire doors in Wilmslow and the surrounding area, including Cheadle Hulme and Hazel Grove. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Wilmslow?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.