FD30 fire doors in Macclesfield: what's involved
Our FD30 fire doors service covers Macclesfield and the wider Cheshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Around Macclesfield, care homes, low-rise blocks of flats and HMOs all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
For a mixed portfolio in Macclesfield, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Macclesfield is sized for the opening, rather than trimmed beyond what its certification allows.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
Each installation includes:
- Survey of the opening, frame and existing ironmongery
- Overhead closer set to close and latch
- Intumescent strips and smoke seals to the certification
- Frame-to-wall gap sealed with an evidenced material
The regulations behind fire doors in Macclesfield
England's framework applies in Macclesfield. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Macclesfield, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Where FD30 fire doors fit in Macclesfield
The need for FD30 fire doors usually arises in schools or offices, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Macclesfield to keep escape routes protected throughout.
How a Macclesfield job runs
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Macclesfield
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Macclesfield building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Macclesfield and neighbouring towns
We also cover towns near Macclesfield, including Wilmslow (10.3 km away), Congleton and Cheadle Hulme. If your building is in SK11 or a neighbouring district, the service and pricing are the same.
Questions
Is Macclesfield within your coverage area?
It is. We cover Macclesfield in Cheshire and neighbouring towns such as Wilmslow. There is no charge for the survey.
Can you work from an existing inspection report for my Macclesfield building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.