Glazed fire doors for Wilmslow buildings
We provide glazed fire doors in Wilmslow (SK9 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Wilmslow, fire door work covers everything from schools to small blocks of flats. We plan each job around the people who use the building.
When a vision panel breaks in a Wilmslow building, we re-glaze it to the door's original glazing system rather than a near match. We check glazed doors in Wilmslow for both fire performance and safety glazing before recommending repair or replacement.
Safety and visibility
Glass in doors also has to meet safety glazing rules, so the fire-rated glass chosen needs to be suitable for impact as well. For schools and care settings we also consider where the panel sits so that children or wheelchair users can see through it.
As standard, the work covers:
- Re-glazing of damaged vision panels to the original system
- Glazed doorsets with certified apertures
- Evidence of the glazing system fitted
- Tested beads, glazing seals and fixings
What the rules say for Wilmslow
The rules that apply to fire doors in Wilmslow are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Wilmslow block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Wilmslow
Typical settings for glazed fire doors include communal corridors, offices and clinics. In Wilmslow, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Wilmslow installation
- Identify the door's certification and glazing system
- Confirm glass type, size and impact requirements
- Supply glazed doorsets or matching glazing kits
- Fit glass, seals and beads to the tested system
- Check gaps, closer and latching on the finished door
- Record the products used
Budgeting for glazed fire doors in Wilmslow
As a guide, budget £850–£1,900 per glazed doorset supplied and fitted; re-glazing priced per panel, ex VAT for glazed fire doors. The figure for your Wilmslow building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Wilmslow
We also cover towns near Wilmslow, including Cheadle Hulme (6.0 km away), Hazel Grove and Altrincham. If your building is in SK9 or a neighbouring district, the service and pricing are the same.
Common questions
Is Wilmslow within your coverage area?
It is. We cover Wilmslow in Cheshire and neighbouring towns such as Cheadle Hulme. There is no charge for the survey.
Can you work from an existing inspection report for my Wilmslow building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can any toughened glass go in a fire door?
No. Fire doors need fire-rated glass of the type and size covered by the door's test evidence, fitted with the matching beads and seals. Standard toughened glass is not fire resisting.
What happens if the glass in a fire door breaks?
It should be re-glazed with the same fire-rated glass and glazing system as the original. A temporary board or standard glass leaves the door non-compliant.