Steel fire doors in Seaford, done to the evidence
If you need steel fire doors in Seaford, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Seaford range from small offices to light industrial buildings and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For steel fire doors in Seaford we order factory-prepared doorsets so the hardware matches the test evidence exactly. We anchor and seal steel frames in Seaford buildings to the manufacturer's instructions and photograph the work before it is covered.
Where steel fire doors are the better choice
Steel doorsets cope with impact, damp and rough handling better than most timber doors. They are a natural fit for plant and boiler rooms, refuse stores, car park lobbies, workshops and warehouses. Many steel doorsets are available in ratings of 60 minutes and beyond where the test evidence supports it, which suits the higher-rated walls around plant spaces.
As standard, the work covers:
- Factory-prepared hinges and hardware
- Frame anchoring and gap sealing to instructions
- Single and double steel doorsets
- Ratings to suit the wall, including 60 minutes
Which fire door rules apply in Seaford?
Fire doors in Seaford fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Seaford above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Seaford need steel fire doors?
You are most likely to need steel fire doors if you look after car park lobbies, plant rooms or bin stores. Whatever the building in Seaford, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
Guide prices in Seaford
As a guide, budget £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. The figure for your Seaford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Seaford
Neighbouring towns such as Rottingdean, Eastbourne, Hailsham and Brighton are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Is Seaford within your coverage area?
It is. We cover Seaford in East Sussex and neighbouring towns such as Rottingdean. There is no charge for the survey.
How quickly can you survey in Seaford?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.
Are steel fire doors better than timber?
Not better, just suited to different places. Steel doors are tougher and resist damp and impact, so they suit plant rooms and industrial areas. Timber doors are more common in residential and office interiors.