Steel fire doors in Exeter: what's involved
Our steel fire doors service in Exeter is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around Exeter, GP surgeries, schools and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Plant rooms, bin stores and warehouses in and around Exeter often call for steel doorsets that can take knocks and damp. For steel fire doors in Exeter we order factory-prepared doorsets so the hardware matches the test evidence exactly.
How installation differs from timber
Steel frames are fixed with the anchors and fixing centres the manufacturer specifies, and frames are often grouted or packed according to the instructions. Steel doors usually arrive with hinges and hardware preparations made in the factory, so the hardware set must be ordered correctly at the outset. BS 8214:2026 now covers steel, metal and composite doors as well as timber, including how to seal them to the surrounding structure.
As standard, the work covers:
- Powder-coated finishes
- Ratings to suit the wall, including 60 minutes
- Factory-prepared hinges and hardware
- Locks, closers and panic hardware as specified
What the rules say for Exeter
The rules that apply to fire doors in Exeter are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Exeter block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs steel fire doors in Exeter?
The need for steel fire doors usually arises in bin stores or car park lobbies, and sometimes plant rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Exeter to keep escape routes protected throughout.
Our process in Exeter
- Survey the opening, wall type and use
- Specify rating, size, hardware and finish
- Order factory-prepared steel doorset
- Remove existing door and prepare the opening
- Anchor, pack and seal the frame; hang the leaf
- Commission closer and locks; record evidence
What does steel fire doors cost in Exeter?
As a guide, budget £900–£2,200 per steel doorset supplied and fitted, ex VAT for steel fire doors. The figure for your Exeter building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Exeter
We also cover towns near Exeter, including Heavitree (2.2 km away), Exmouth and Tiverton. If your building is in EX4 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Exeter?
Yes, we take on steel fire doors in Exeter and the surrounding area, including Heavitree and Exmouth. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Exeter building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do steel fire doors need intumescent seals?
Some steel doorsets use intumescent seals and some do not, depending on how they were tested. The certification sets out exactly what is required.
Are steel fire doors better than timber?
Not better, just suited to different places. Steel doors are tougher and resist damp and impact, so they suit plant rooms and industrial areas. Timber doors are more common in residential and office interiors.