Getting riser and cupboard fire doors right in South Shields
Looking for riser and cupboard fire doors in South Shields? We supply and fit certified fire doors and components across South Shields and the wider Tyne and Wear area, working from a free survey and a fixed written quote.
Fire doors in South Shields protect escape routes in houses with integral garages, family homes after loft conversions and HMOs alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Riser and meter cupboard doors in South Shields blocks are easy to overlook until an inspection flags them. We match riser doors in South Shields to the rating of the riser enclosure, not to whatever was there before.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
What you get:
- Seals and frame gap sealing
- Signage as required
- Fire-rated riser and cupboard doorsets
- Single and double flush configurations
What the rules say for South Shields
The rules that apply to fire doors in South Shields are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a South Shields block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where riser and cupboard fire doors fit in South Shields
You are most likely to need riser and cupboard fire doors if you look after blocks of flats, hotels or student accommodation. Whatever the building in South Shields, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in South Shields
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Guide prices in South Shields
Guide pricing for riser and cupboard fire doors: £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. Volume work across several doors in one South Shields building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
South Shields and neighbouring towns
South Shields is about 11.9 km from Newcastle upon Tyne, and we cover both, along with nearby Tynemouth and North Shields. Send us your postcode and we'll confirm survey dates.
Questions
Is South Shields within your coverage area?
It is. We cover South Shields in Tyne and Wear and neighbouring towns such as Tynemouth. There is no charge for the survey.
How quickly can you survey in South Shields?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Do you fix fire stopping inside risers?
Fire stopping is a separate specialist trade. We record anything we see while fitting doors and can coordinate with your fire stopping contractor.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.