What riser and cupboard fire doors in Didcot should include
When you book riser and cupboard fire doors in Didcot, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Around Didcot, care homes, small blocks of flats and small offices all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Riser and meter cupboard doors in Didcot blocks are easy to overlook until an inspection flags them. While fitting riser doors in Didcot, we photograph any gaps in fire stopping we can see and pass them on to you.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
On a typical job that means:
- Signage as required
- Single and double flush configurations
- Record of any fire stopping concerns found
- Seals and frame gap sealing
Fire door law for Didcot properties
The rules that apply to fire doors in Didcot are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Didcot block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Didcot need riser and cupboard fire doors?
You are most likely to need riser and cupboard fire doors if you look after hotels, student accommodation or blocks of flats. Whatever the building in Didcot, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Didcot
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Guide prices in Didcot
Budget around £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT for riser and cupboard fire doors. Our guide prices are the same in Didcot as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Didcot and nearby
Nearby towns we cover include Abingdon, Oxford and Thatcham. Distance from Didcot does not change our guide prices, and the survey and quote are free.
Common questions
Do you work in Didcot?
Yes, we take on riser and cupboard fire doors in Didcot and the surrounding area, including Abingdon and Oxford. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Didcot building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I use a standard access panel for a riser?
Only if it is a fire-rated product with evidence for the wall rating. Many ordinary access panels and cupboard doors are not fire rated.
Do you fix fire stopping inside risers?
Fire stopping is a separate specialist trade. We record anything we see while fitting doors and can coordinate with your fire stopping contractor.