What riser and cupboard fire doors in Borehamwood should include
If you need riser and cupboard fire doors in Borehamwood, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Borehamwood, fire door work covers everything from schools to small blocks of flats. We plan each job around the people who use the building.
While fitting riser doors in Borehamwood, we photograph any gaps in fire stopping we can see and pass them on to you. Riser and meter cupboard doors in Borehamwood blocks are easy to overlook until an inspection flags them.
The fire stopping behind the door
The door is only half the picture. Inside the riser, the services passing through each floor must be fire stopped. That is a separate specialist task. Where we find gaps or missing fire stopping while fitting riser doors, we record it and flag it to you so it can be addressed.
On a typical job that means:
- Record of any fire stopping concerns found
- Single and double flush configurations
- Signage as required
- Seals and frame gap sealing
The regulations behind fire doors in Borehamwood
Fire doors in Borehamwood fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Borehamwood above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where riser and cupboard fire doors fit in Borehamwood
From student accommodation to blocks of flats, the requirement for riser and cupboard fire doors in Borehamwood comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Borehamwood installation
- Survey risers, cupboards and wall ratings
- Confirm locked-shut or self-closing for each door
- Order doorsets sized to the openings
- Install and seal frames, hang leaves
- Fit locks, seals and signage
- Photograph and report on visible fire stopping
Prices for riser and cupboard fire doors in Borehamwood
If you need a budget figure first, the guide for riser and cupboard fire doors is £450–£1,200 per riser or cupboard doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Borehamwood
We also cover towns near Borehamwood, including Barnet (5.4 km away), Bushey and Hadley Wood. If your building is in WD6 or a neighbouring district, the service and pricing are the same.
Common questions
Is Borehamwood within your coverage area?
It is. We cover Borehamwood in Hertfordshire and neighbouring towns such as Barnet. There is no charge for the survey.
How quickly can you survey in Borehamwood?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
What rating should a riser door be?
It should match the fire resistance the strategy requires for the riser enclosure, commonly 30 or 60 minutes. We confirm it before ordering.
Do you fix fire stopping inside risers?
Fire stopping is a separate specialist trade. We record anything we see while fitting doors and can coordinate with your fire stopping contractor.