Loft conversion fire doors in Cirencester, done to the evidence
When you book loft conversion fire doors in Cirencester, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Cirencester range from small blocks of flats to light industrial buildings and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We can fit loft conversion fire doors in Cirencester as your builder's subcontractor or directly for you. For homes in Cirencester, we match fire doors to your existing style wherever certified options allow.
FD20 or FD30?
In England, the guidance generally asks for FD20 (E20) doors in this situation, and self-closers are not usually required within a house. Scotland is different: the domestic Technical Handbook expects doors onto the protected stair enclosure to be self-closing fire doors, so closers are part of the job there. Many homeowners choose FD30 doors anyway, because they are widely available and the price difference is small. Either way, the door must be fitted properly: correct gaps, fire-tested hinges and an intumescent strip where the product requires one.
What you get:
- Work coordinated with your builder
- Frame repairs or new linings where needed
- Check of which openings need fire doors
- FD20 or FD30 doors in your chosen style
Fire door law for Cirencester properties
Fire doors in Cirencester fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Cirencester above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Cirencester
The need for loft conversion fire doors usually arises in terraced houses or bungalows gaining an upper floor, and sometimes semi-detached houses. In Cirencester we can work for you directly or alongside your builder, and single doors are as welcome as whole-house jobs.
From enquiry to handover in Cirencester
- Review the building control requirements or drawings
- Survey each door opening off the stair
- Agree door style and rating
- Fit doors, hinges and strips
- Check gaps and operation
- Hand over product details
What does loft conversion fire doors cost in Cirencester?
As a guide, budget £300–£650 per door supplied and fitted, ex VAT for loft conversion fire doors. The figure for your Cirencester building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Cirencester
Cirencester is about 24.8 km from Gloucester, and we cover both, along with nearby Stroud and Cheltenham. Send us your postcode and we'll confirm survey dates.
Questions
Do you work in Cirencester?
Yes, we take on loft conversion fire doors in Cirencester and the surrounding area, including Stroud and Cheltenham. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Cirencester building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can you match my existing doors?
Certified fire doors come in many styles, including panelled and cottage designs, so a close match is usually possible.
Can I just add intumescent strips to my existing doors?
Generally no. A standard internal door is not a fire door, and strips alone will not make it one. Existing doors need to be replaced with certified fire doors.

