Intumescent strips and smoke seals in Stafford

Intumescent strips and smoke seals for Stafford buildings

Our intumescent strips and smoke seals service in Stafford is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

In and around Stafford, fire door work covers everything from low-rise blocks of flats to care homes. We plan each job around the people who use the building.

We check that each door in your Stafford building closes and latches against its new seals before signing it off. Painted and missing seals are among the most common fire door defects nationally; in Stafford we replace them with the type and size the certification specifies.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

Each installation includes:

• Identification of the specified seals
• Removal of damaged or painted seals
• Brush or blade smoke seals
• Intumescent strips in frame or leaf edge

The regulations behind fire doors in Stafford

The rules that apply to fire doors in Stafford are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Stafford block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Where intumescent strips and smoke seals fit in Stafford

The need for intumescent strips and smoke seals usually arises in care homes or offices, and sometimes blocks of flats. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Stafford to keep escape routes protected throughout.

How a Stafford job runs

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Guide prices in Stafford

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Stafford and neighbouring towns

Neighbouring towns such as Rugeley, Cannock, Burntwood and Longton are covered too, so clients with several buildings can use one installer and one evidence format.

Questions