Intumescent strips and smoke seals for Burton upon Trent buildings
From the DE14 postcode district outwards, we take on intumescent strips and smoke seals across Burton upon Trent for homes, blocks and workplaces.
In and around Burton upon Trent, fire door work covers everything from purpose-built flats to HMOs. We plan each job around the people who use the building.
Seal replacement in Burton upon Trent can be combined with any other remedials on the same inspection report. We check that each door in your Burton upon Trent building closes and latches against its new seals before signing it off.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
On a typical job that means:
- Intumescent pads to hinges and locks
- Intumescent strips in frame or leaf edge
- Brush or blade smoke seals
- Check of gaps and closing after fitting
Rules and responsibilities in Burton upon Trent
Fire doors in Burton upon Trent fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Burton upon Trent above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where intumescent strips and smoke seals fit in Burton upon Trent
Typical settings for intumescent strips and smoke seals include care homes, HMOs and schools. In Burton upon Trent, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Burton upon Trent installation
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Burton upon Trent
Budget around £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. Our guide prices are the same in Burton upon Trent as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Burton upon Trent and nearby
Nearby towns we cover include Swadlincote, Derby and Lichfield. Distance from Burton upon Trent does not change our guide prices, and the survey and quote are free.
Questions
Do you cover DE14 and nearby postcodes?
Yes. We cover Burton upon Trent including DE14, and nearby towns such as Swadlincote and Derby. The survey and written quote are free.
Can you work from an existing inspection report for my Burton upon Trent building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Can I just add intumescent strips to an ordinary door?
No. Strips do not turn an ordinary door into a fire door. They only work as part of a door that was tested and certified with them.