Fire door ironmongery in Atherton, done to the evidence
For property owners, landlords and managing agents in Atherton, we offer fire door ironmongery with one team for the survey, the product and the installation.
Buildings in and around Atherton range from care homes to houses with integral garages and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Atherton we replace them with hardware covered by each door's evidence. We supply ironmongery for Atherton fire doors that matches each door's test evidence.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
What you get:
- Lever handles, pull handles and push plates
- Locks and latches covered by the evidence
- Fire-rated hinges, commonly grade 13
- Intumescent pads and lock linings
Rules and responsibilities in Atherton
Fire doors in Atherton fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Atherton above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Atherton
You are most likely to need fire door ironmongery if you look after schools, hotels or HMOs. Whatever the building in Atherton, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Atherton
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Atherton and neighbouring towns
We also cover towns near Atherton, including Tyldesley (2.0 km away), Westhoughton and Leigh. If your building is in M46 or a neighbouring district, the service and pricing are the same.
Questions from Atherton
Do you cover M46 and nearby postcodes?
Yes. We cover Atherton including M46, and nearby towns such as Tyldesley and Westhoughton. The survey and written quote are free.
What happens on a survey in Atherton?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.