Getting intumescent strips and smoke seals right in Ilford
Looking for intumescent strips and smoke seals in Ilford? We supply and fit certified fire doors and components across Ilford and the wider Greater London area, working from a free survey and a fixed written quote.
Fire doors in Ilford protect escape routes in hotels, shared houses and purpose-built blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Seal replacement in Ilford can be combined with any other remedials on the same inspection report. We check that each door in your Ilford building closes and latches against its new seals before signing it off.
Getting the specification right
The door's certification states the type, size and position of strips and seals: in the frame or the leaf edge, single or double, and whether a combined intumescent and smoke seal is used. Replacements must match. Swapping in a generic strip from a hardware shop can undermine the door's performance.
What you get:
- Removal of damaged or painted seals
- Brush or blade smoke seals
- Intumescent strips in frame or leaf edge
- Intumescent pads to hinges and locks
Fire door law for Ilford properties
Fire doors in Ilford fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. Enforcement of fire safety law in Ilford sits with the London Fire Brigade.
For residential buildings in Ilford above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where intumescent strips and smoke seals fit in Ilford
Landlords, managing agents, facilities teams and homeowners in Ilford can all commission intumescent strips and smoke seals from us. The usual settings are blocks of flats and offices, though single doors for HMOs are just as welcome.
Our process in Ilford
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Budgeting for intumescent strips and smoke seals in Ilford
As a guide, budget £45–£110 per door to supply and fit strips and seals, ex VAT for intumescent strips and smoke seals. The figure for your Ilford building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Ilford and nearby
We also cover towns near Ilford, including Barking (2.8 km away), Becontree and Leytonstone. If your building is in IG1 or a neighbouring district, the service and pricing are the same.
Questions from Ilford
Do you cover IG1 and nearby postcodes?
Yes. We cover Ilford including IG1, and nearby towns such as Barking and Becontree. The survey and written quote are free.
Can you work from an existing inspection report for my Ilford building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.