Intumescent strips and smoke seals in Chelsea

Intumescent strips and smoke seals: our service in Chelsea

If you need intumescent strips and smoke seals in Chelsea, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

In and around Chelsea, fire door work covers everything from mixed-use office buildings to student accommodation. We plan each job around the people who use the building.

Painted and missing seals are among the most common fire door defects nationally; in Chelsea we replace them with the type and size the certification specifies. Seal replacement in Chelsea can be combined with any other remedials on the same inspection report.

Pads, linings and hidden protection

Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.

Each installation includes:

• Intumescent pads to hinges and locks
• Removal of damaged or painted seals
• Check of gaps and closing after fitting
• Identification of the specified seals

Rules and responsibilities in Chelsea

Fire doors in Chelsea fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained. In London, the London Fire Brigade is the enforcing authority for fire safety law.

For residential buildings in Chelsea above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Who needs intumescent strips and smoke seals in Chelsea?

From blocks of flats to care homes, the requirement for intumescent strips and smoke seals in Chelsea comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

From enquiry to handover in Chelsea

1. Identify door certification and seal specification
2. Remove failed seals and clean the grooves
3. Fit new strips and seals to the specified positions
4. Fit missing pads and lock linings
5. Check the door closes and latches against the new seals
6. Record the products fitted

Guide prices in Chelsea

If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Chelsea and nearby

Neighbouring towns such as Battersea, Fulham, Pimlico and City of Westminster are covered too, so clients with several buildings can use one installer and one evidence format.

Questions