Intumescent strips and smoke seals for Kingston upon Hull buildings
Our intumescent strips and smoke seals service covers Kingston upon Hull and the wider East Riding of Yorkshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Kingston upon Hull has a broad mix of buildings, including shared houses, restaurants and student accommodation, and the same fire door principles apply to all of them.
Painted and missing seals are among the most common fire door defects nationally; in Kingston upon Hull we replace them with the type and size the certification specifies. Seal replacement in Kingston upon Hull can be combined with any other remedials on the same inspection report.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
What you get:
- Removal of damaged or painted seals
- Check of gaps and closing after fitting
- Intumescent strips in frame or leaf edge
- Identification of the specified seals
What the rules say for Kingston upon Hull
England's framework applies in Kingston upon Hull. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Kingston upon Hull, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Kingston upon Hull
Landlords, managing agents, facilities teams and homeowners in Kingston upon Hull can all commission intumescent strips and smoke seals from us. The usual settings are schools and blocks of flats, though single doors for care homes are just as welcome.
From enquiry to handover in Kingston upon Hull
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Kingston upon Hull
If you need a budget figure first, the guide for intumescent strips and smoke seals is £45–£110 per door to supply and fit strips and seals, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Kingston upon Hull
As well as Kingston upon Hull, we cover neighbouring towns including Beverley, Grimsby and Scunthorpe. The survey and quote are free.
Questions from Kingston upon Hull
Is Kingston upon Hull within your coverage area?
It is. We cover Kingston upon Hull in East Riding of Yorkshire and neighbouring towns such as Beverley. There is no charge for the survey.
Can you work from an existing inspection report for my Kingston upon Hull building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.