What intumescent strips and smoke seals in Torquay should include
Our intumescent strips and smoke seals service in Torquay is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Fire doors in Torquay protect escape routes in care homes, schools and HMOs alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Seal replacement in Torquay can be combined with any other remedials on the same inspection report. We check that each door in your Torquay building closes and latches against its new seals before signing it off.
Pads, linings and hidden protection
Fire doors also rely on intumescent material you cannot see: pads behind hinges, linings around lock bodies and glazing seals. Where these are missing or damaged, we fit the correct items as part of the work.
What you get:
- Intumescent strips in frame or leaf edge
- Intumescent pads to hinges and locks
- Identification of the specified seals
- Removal of damaged or painted seals
Which fire door rules apply in Torquay?
The rules that apply to fire doors in Torquay are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Torquay block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where intumescent strips and smoke seals fit in Torquay
You are most likely to need intumescent strips and smoke seals if you look after offices, care homes or HMOs. Whatever the building in Torquay, we survey each opening and tell you which doors need work and which do not.
The steps on a Torquay installation
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Guide prices in Torquay
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Torquay building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Torquay
Torquay is about 44.9 km from Plymouth, and we cover both, along with nearby Paignton and Newton Abbot. Send us your postcode and we'll confirm survey dates.
Common questions
Is Torquay within your coverage area?
It is. We cover Torquay in Devon and neighbouring towns such as Paignton. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.
Do all fire doors need smoke seals?
Only where the door is specified for smoke control, such as FD30S doors. Many doors on escape routes and flat entrances are specified this way.