Fire door replacement in Torquay, done to the evidence
Our fire door replacement service in Torquay is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Torquay range from HMOs to industrial estates and high-street shops. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
If a door in your Torquay building can be repaired rather than replaced, we will tell you. If your Torquay building has an inspection report or fire risk assessment, we quote against the same door references.
Repair or replace?
Plenty of fire door faults can be fixed: worn seals, loose hinges, failed closers, small gaps. Replacement is the right call when the leaf is split, delaminated or badly damaged, when gaps are too large to correct within the manufacturer's guidance, when the door was never a fire door, or when unapproved holes and alterations have been made. We explain the reason for every replacement we recommend. Our repairs page covers what can be fixed.
Each installation includes:
- Assessment of repair versus replacement
- Seals, hinges, closer and latch to certification
- Frame repair or replacement where needed
- Certified leaf or full doorset
Rules and responsibilities in Torquay
The rules that apply to fire doors in Torquay are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Torquay block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Torquay need fire door replacement?
From schools to offices, the requirement for fire door replacement in Torquay comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
How a Torquay job runs
- Review the inspection report or survey each door
- Recommend repair or replacement with reasons
- Order replacements to size
- Remove the old door only when the new one is on site
- Install, test and record each opening
- Dispose of old doors and hand over evidence
Guide prices in Torquay
If you need a budget figure first, the guide for fire door replacement is £300–£600 for a leaf, £650–£2,400 for a doorset depending on type, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Torquay
Neighbouring towns such as Paignton, Newton Abbot, Exmouth and Heavitree are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Torquay
Do you cover TQ1 and nearby postcodes?
Yes. We cover Torquay including TQ1, and nearby towns such as Paignton and Newton Abbot. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do you take away the old doors?
Yes. Removal and disposal of old doors and packaging is included in our quotes unless you ask otherwise.
Can you work from my fire risk assessment?
Yes. Send us the actions and we will price each fire door item and report back against the same references.