Getting intumescent strips and smoke seals right in Ilkeston
If you need intumescent strips and smoke seals in Ilkeston, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Ilkeston range from light industrial buildings to family homes after loft conversions and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Painted and missing seals are among the most common fire door defects nationally; in Ilkeston we replace them with the type and size the certification specifies. We check that each door in your Ilkeston building closes and latches against its new seals before signing it off.
Why seals fail
Seals are the most common defect on fire door inspections. They get painted over, pulled out, damaged by cleaning or simply worn by years of use. A painted brush seal no longer seals, and a strip of the wrong size may not close the gap in a fire. Our guide to seals explains the different types.
As standard, the work covers:
- Check of gaps and closing after fitting
- Removal of damaged or painted seals
- Intumescent pads to hinges and locks
- Intumescent strips in frame or leaf edge
Rules and responsibilities in Ilkeston
In Ilkeston, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Ilkeston building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Ilkeston
Typical settings for intumescent strips and smoke seals include schools, offices and HMOs. In Ilkeston, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Ilkeston job runs
- Identify door certification and seal specification
- Remove failed seals and clean the grooves
- Fit new strips and seals to the specified positions
- Fit missing pads and lock linings
- Check the door closes and latches against the new seals
- Record the products fitted
Prices for intumescent strips and smoke seals in Ilkeston
Guide pricing for intumescent strips and smoke seals: £45–£110 per door to supply and fit strips and seals, ex VAT. Volume work across several doors in one Ilkeston building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Ilkeston
Nearby towns we cover include Heanor, Long Eaton and Ripley. Distance from Ilkeston does not change our guide prices, and the survey and quote are free.
Common questions
Is Ilkeston within your coverage area?
It is. We cover Ilkeston in Derbyshire and neighbouring towns such as Heanor. There is no charge for the survey.
Can you work from an existing inspection report for my Ilkeston building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
How long do seals last?
It depends on use and care. Seals on busy doors wear faster. Regular inspections will show when they need replacing.
Can smoke seals be painted?
No. Paint stops brush and blade seals working. If seals have been painted, they should be replaced.