Integral garage fire doors for Torquay buildings
If you need integral garage fire doors in Torquay, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Torquay range from low-rise blocks of flats to schools and HMOs. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
If you are selling a home in Torquay, we can leave product details for your solicitor along with the door. For homes in Torquay with an integral garage, the door into the house is one of the few internal doors expected to be fire-rated and self-closing.
When you might need a new garage door
The usual triggers are building control flagging the door during a conversion or extension, a house sale survey raising it, or the discovery that the original door has been swapped for a standard internal door. Some garage conversions remove the need altogether; others create new requirements. Our guide to fire doors in houses explains when they are needed.
As standard, the work covers:
- Self-closer set gently but positively
- Intumescent and smoke seals
- Survey of the opening, threshold and step
- Threshold detailing for smoke control
Fire door law for Torquay properties
The rules that apply to fire doors in Torquay are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Torquay block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs integral garage fire doors in Torquay?
The need for integral garage fire doors usually arises in homes being extended or new-build homes, and sometimes houses with integral garages. In Torquay we can work for you directly or alongside your builder, and single doors are as welcome as whole-house jobs.
The steps on a Torquay installation
- Visit to measure the opening and check the frame
- Agree door style and finish
- Order certified door or doorset
- Fit door, seals and closer
- Adjust threshold and latching
- Leave product information for your records
Guide prices in Torquay
As a guide, budget £550–£1,100 supplied and fitted, depending on whether the frame is replaced, ex VAT for integral garage fire doors. The figure for your Torquay building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Torquay and nearby
Neighbouring towns such as Paignton, Newton Abbot, Exmouth and Heavitree are covered too, so clients with several buildings can use one installer and one evidence format.
Questions from Torquay
Is Torquay within your coverage area?
It is. We cover Torquay in Devon and neighbouring towns such as Paignton. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Does the garage door need a closer?
Building control will normally expect the door between an integral garage and the house to be self-closing. We fit closers that shut and latch the door gently.
Can it match my other doors?
Often, yes. Many certified ranges include panelled and flush styles in finishes that blend with standard internal doors.