Fire door hold-open devices for Ashton-under-Lyne buildings
We provide fire door hold-open devices in Ashton-under-Lyne (OL7 and the surrounding postcodes), from the first survey through to a documented handover.
Buildings in and around Ashton-under-Lyne range from houses with integral garages to care homes and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Where doors in Ashton-under-Lyne care homes, schools or offices are being wedged open, a hold-open device is the safe fix. We coordinate with your fire alarm contractor in Ashton-under-Lyne so every hold-open releases when it should.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
As standard, the work covers:
- Record of devices and test results
- Release testing with the alarm
- Coordination of alarm interface
- Assessment of door use and alarm system
The regulations behind fire doors in Ashton-under-Lyne
The rules that apply to fire doors in Ashton-under-Lyne are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Ashton-under-Lyne block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Ashton-under-Lyne need fire door hold-open devices?
Landlords, managing agents, facilities teams and homeowners in Ashton-under-Lyne can all commission fire door hold-open devices from us. The usual settings are clinics and communal corridors, though single doors for offices are just as welcome.
Our process in Ashton-under-Lyne
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Ashton-under-Lyne
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Ashton-under-Lyne building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Ashton-under-Lyne
Ashton-under-Lyne is about 9.2 km from Manchester, and we cover both, along with nearby Dukinfield and Stalybridge. Send us your postcode and we'll confirm survey dates.
Questions from Ashton-under-Lyne
Do you work in Ashton-under-Lyne?
Yes, we take on fire door hold-open devices in Ashton-under-Lyne and the surrounding area, including Dukinfield and Stalybridge. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Ashton-under-Lyne?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.