Fire door hold-open devices in Barking: what's involved
Looking for fire door hold-open devices in Barking? We supply and fit certified fire doors and components across Barking and the wider Greater London area, working from a free survey and a fixed written quote.
Fire doors in Barking protect escape routes in schools, student accommodation and care homes alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Where doors in Barking care homes, schools or offices are being wedged open, a hold-open device is the safe fix. Free-swing closers suit Barking settings where residents or pupils find doors hard to open.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
What you get:
- Record of devices and test results
- Assessment of door use and alarm system
- Release testing with the alarm
- Hold-open and free-swing closers
Which fire door rules apply in Barking?
The rules that apply to fire doors in Barking are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts. Enforcement of fire safety law in Barking sits with the London Fire Brigade.
Where a Barking block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where fire door hold-open devices fit in Barking
From communal corridors to care homes, the requirement for fire door hold-open devices in Barking comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
How a Barking job runs
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Guide prices in Barking
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Barking building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Barking and nearby
We also cover towns near Barking, including Ilford (2.8 km away), Becontree and Thamesmead. If your building is in IG11 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover IG11 and nearby postcodes?
Yes. We cover Barking including IG11, and nearby towns such as Ilford and Becontree. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.