Fire door hold-open devices in Stroud: what's involved
Our fire door hold-open devices service covers Stroud and the wider Gloucestershire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in Stroud protect escape routes in low-rise blocks of flats, family homes after loft conversions and industrial estates alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Free-swing closers suit Stroud settings where residents or pupils find doors hard to open. Where doors in Stroud care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
What you get:
- Release testing with the alarm
- Hold-open and free-swing closers
- Assessment of door use and alarm system
- Record of devices and test results
The regulations behind fire doors in Stroud
Fire doors in Stroud fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Stroud above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door hold-open devices in Stroud?
From offices to communal corridors, the requirement for fire door hold-open devices in Stroud comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Stroud installation
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Budgeting for fire door hold-open devices in Stroud
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Stroud as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Stroud
Stroud is about 13.2 km from Gloucester, and we cover both, along with nearby Cirencester and Cheltenham. Send us your postcode and we'll confirm survey dates.
Common questions
Do you cover GL6 and nearby postcodes?
Yes. We cover Stroud including GL6, and nearby towns such as Gloucester and Cirencester. The survey and written quote are free.
What happens on a survey in Stroud?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the difference between a hold-open and a free-swing closer?
A hold-open keeps the door at a fixed open position. A free-swing closer lets the door move freely, as if no closer were fitted, until the alarm sounds.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.