Fire door hold-open devices for Kingswood buildings
If you need fire door hold-open devices in Kingswood, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Around Kingswood, schools, small offices and family homes after loft conversions all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Free-swing closers suit Kingswood settings where residents or pupils find doors hard to open. Where doors in Kingswood care homes, schools or offices are being wedged open, a hold-open device is the safe fix.
Types of hold-open
Electromagnetic door holders are wall or floor magnets wired to the fire alarm. Hold-open closers combine the closer and the hold-open in one unit. Free-swing closers let the door move freely and close it on alarm. Some battery units listen for the alarm sound; these must be suitable for the alarm system and the building. The right choice depends on the door, the alarm and how people use the space.
What you get:
- Assessment of door use and alarm system
- Record of devices and test results
- Release testing with the alarm
- Electromagnetic holders to BS EN 1155
Which fire door rules apply in Kingswood?
England's framework applies in Kingswood. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Kingswood, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Kingswood need fire door hold-open devices?
You are most likely to need fire door hold-open devices if you look after clinics, care homes or schools. Whatever the building in Kingswood, we survey each opening and tell you which doors need work and which do not.
The steps on a Kingswood installation
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
Prices for fire door hold-open devices in Kingswood
Budget around £180–£450 per door for the device, excluding fire alarm interface work, ex VAT for fire door hold-open devices. Our guide prices are the same in Kingswood as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Kingswood and neighbouring towns
Neighbouring towns such as Mangotsfield, Bristol, Yate and Bath are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you cover BS15 and nearby postcodes?
Yes. We cover Kingswood including BS15, and nearby towns such as Mangotsfield and Bristol. The survey and written quote are free.
Can you work from an existing inspection report for my Kingswood building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Is it legal to wedge open a fire door?
Wedging a fire door open defeats its purpose and is likely to breach the duties under fire safety law. A hold-open device that releases on alarm is the safe alternative.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.