Getting fire door hold-open devices right in Plymstock
If you need fire door hold-open devices in Plymstock, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Plymstock range from small blocks of flats to family homes after loft conversions and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
We coordinate with your fire alarm contractor in Plymstock so every hold-open releases when it should. Free-swing closers suit Plymstock settings where residents or pupils find doors hard to open.
Why doors get wedged
Busy corridors, care homes and schools have doors that people need open all day. If there is no safe way to hold them, they get wedged, which defeats the door completely. A hold-open device or free-swing closer solves the problem properly.
On a typical job that means:
- Assessment of door use and alarm system
- Coordination of alarm interface
- Release testing with the alarm
- Record of devices and test results
The regulations behind fire doors in Plymstock
The rules that apply to fire doors in Plymstock are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Plymstock block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Plymstock need fire door hold-open devices?
The need for fire door hold-open devices usually arises in schools or communal corridors, and sometimes care homes. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Plymstock to keep escape routes protected throughout.
Our process in Plymstock
- Survey the doors and the fire alarm arrangement
- Choose device type for each door
- Agree interface work with the alarm contractor
- Fit and commission the devices
- Test release on alarm activation
- Record results and hand over
What does fire door hold-open devices cost in Plymstock?
Guide pricing for fire door hold-open devices: £180–£450 per door for the device, excluding fire alarm interface work, ex VAT. Volume work across several doors in one Plymstock building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Plymstock and neighbouring towns
Plymstock is about 3.9 km from Plymouth, and we cover both, along with nearby Paignton and Newton Abbot. Send us your postcode and we'll confirm survey dates.
Questions from Plymstock
Do you work in Plymstock?
Yes, we take on fire door hold-open devices in Plymstock and the surrounding area, including Plymouth and Paignton. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Plymstock?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Who tests hold-open devices?
They should be tested with the fire alarm as part of the routine testing arrangements. We test them at installation and record the results.
Do hold-open devices need the fire alarm?
Hard-wired devices are released by the fire alarm system. Some battery units detect the alarm sound instead; they must be suitable for the building and its alarm.