Glazed fire doors in Gloucestershire: what's involved
Whether your building is in Gloucester, Cheltenham or a smaller place in Gloucestershire, we can provide glazed fire doors with the same evidence-led approach.
When a vision panel breaks in a Gloucestershire building, we re-glaze it to the door's original glazing system rather than a near match. Schools, offices and care settings in Gloucestershire often need vision panels, and each one has to use fire-rated glass in a tested system.
Wherever your building is in Gloucestershire, the fire safety duties come from national rules, and our installation standard is the same.
New glazed doors or re-glazing?
Where a door already has a certified aperture, it can usually be re-glazed with the specified glass and system after damage. Cutting a new vision panel into an existing fire door is a different matter: it is only acceptable if the door's certification covers that aperture size and position. In most cases a new glazed doorset is the right answer.
Fire door law for Gloucestershire properties
The rules that apply to fire doors in Gloucestershire are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Gloucestershire block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
The steps on a Gloucestershire installation
- Identify the door's certification and glazing system
- Confirm glass type, size and impact requirements
- Supply glazed doorsets or matching glazing kits
- Fit glass, seals and beads to the tested system
- Check gaps, closer and latching on the finished door
- Record the products used
Prices for glazed fire doors in Gloucestershire
Budget around £850–£1,900 per glazed doorset supplied and fitted; re-glazing priced per panel, ex VAT for glazed fire doors. Our guide prices are the same in Gloucestershire as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Glazed fire doors questions
Do you provide glazed fire doors across Gloucestershire?
Yes. We cover all of Gloucestershire, including Gloucester and Cheltenham. Surveys and written quotes are free.
Are wired glass fire doors still acceptable?
Some older doors use wired glass. Whether it is acceptable depends on its fire rating and whether it meets safety glazing rules for that location. We advise case by case.
Can any toughened glass go in a fire door?
No. Fire doors need fire-rated glass of the type and size covered by the door's test evidence, fitted with the matching beads and seals. Standard toughened glass is not fire resisting.