Glazed fire doors in Portslade, done to the evidence
If you need glazed fire doors in Portslade, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Portslade range from small blocks of flats to houses with integral garages and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Schools, offices and care settings in Portslade often need vision panels, and each one has to use fire-rated glass in a tested system. When a vision panel breaks in a Portslade building, we re-glaze it to the door's original glazing system rather than a near match.
Safety and visibility
Glass in doors also has to meet safety glazing rules, so the fire-rated glass chosen needs to be suitable for impact as well. For schools and care settings we also consider where the panel sits so that children or wheelchair users can see through it.
What you get:
- Fire-rated glass suited to the rating and location
- Tested beads, glazing seals and fixings
- Glazed doorsets with certified apertures
- Evidence of the glazing system fitted
Fire door law for Portslade properties
In Portslade, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Portslade building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Portslade
Landlords, managing agents, facilities teams and homeowners in Portslade can all commission glazed fire doors from us. The usual settings are schools and offices, though single doors for communal corridors are just as welcome.
How a Portslade job runs
- Identify the door's certification and glazing system
- Confirm glass type, size and impact requirements
- Supply glazed doorsets or matching glazing kits
- Fit glass, seals and beads to the tested system
- Check gaps, closer and latching on the finished door
- Record the products used
Prices for glazed fire doors in Portslade
If you need a budget figure first, the guide for glazed fire doors is £850–£1,900 per glazed doorset supplied and fitted; re-glazing priced per panel, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Portslade
We also cover towns near Portslade, including Hove (3.7 km away), Brighton and Worthing. If your building is in BN41 or a neighbouring district, the service and pricing are the same.
Questions
Do you cover BN41 and nearby postcodes?
Yes. We cover Portslade including BN41, and nearby towns such as Hove and Brighton. The survey and written quote are free.
Can you work from an existing inspection report for my Portslade building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Are wired glass fire doors still acceptable?
Some older doors use wired glass. Whether it is acceptable depends on its fire rating and whether it meets safety glazing rules for that location. We advise case by case.
Can you add a vision panel to my existing fire door?
Only if the door's certification allows an aperture of that size and position. Most existing doors cannot be modified this way, so a new glazed doorset is usually needed.