Flat entrance fire doors in Chichester

Flat entrance fire doors in Chichester: what's involved

Our flat entrance fire doors service in Chichester is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Chichester range from light industrial buildings to houses with integral garages and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

In a block of flats in Chichester, each flat's front door is what keeps smoke out of the shared corridor, which is why a working closer matters as much as the door. We work with freeholders, managing agents and individual leaseholders in Chichester, whoever is responsible for the doors under the lease.

Why flat front doors matter so much

In most blocks the fire strategy relies on each flat containing a fire for long enough that other residents can stay put or leave safely. The flat entrance door is the barrier that makes that work. A door without a working closer, with a missing seal or with a non-fire-rated letterplate can let smoke into the corridor within minutes.

In England, regulation 10 of the Fire Safety (England) Regulations 2022 asks responsible persons in residential buildings above 11 metres to use best endeavours to check flat entrance doors at least every 12 months. Rules differ in Wales, Scotland and Northern Ireland; our guide to the regulations for flats sets them out.

What you get:

• Self-closer set to close and latch
• Intumescent and smoke seals, threshold set to evidence
• Survey of door, frame, threshold and ironmongery
• Resident liaison, photo record and certificate references

Which fire door rules apply in Chichester?

Fire doors in Chichester fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Chichester above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Chichester

Landlords, managing agents, facilities teams and homeowners in Chichester can all commission flat entrance fire doors from us. The usual settings are sheltered housing and purpose-built blocks of flats, though single doors for flats above shops are just as welcome.

What happens after you enquire

1. Survey each flat door and agree access with residents
2. Confirm specification, finish and hardware with the client
3. Order certified doorsets made to measure
4. Remove the old door and frame with minimal disruption
5. Install, seal, adjust and test the new doorset
6. Hand over evidence and resident guidance

Prices for flat entrance fire doors in Chichester

If you need a budget figure first, the guide for flat entrance fire doors is £1,200–£2,400 per certified flat entrance doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Chichester and neighbouring towns

Nearby towns we cover include Bognor Regis, Havant and Littlehampton. Distance from Chichester does not change our guide prices, and the survey and quote are free.

Common questions