Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Flat entrance fire doors in Brentwood, CM14

Surveyed, supplied and fitted in Brentwood. FD30S self-closing front doors for flats, fitted as certified doorsets with viewers and security options.

Quote in Brentwood

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

What flat entrance fire doors in Brentwood should include

If you need flat entrance fire doors in Brentwood, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Fire doors in Brentwood protect escape routes in schools, high-street shops and low-rise blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.

We work with freeholders, managing agents and individual leaseholders in Brentwood, whoever is responsible for the doors under the lease. In a block of flats in Brentwood, each flat's front door is what keeps smoke out of the shared corridor, which is why a working closer matters as much as the door.

What goes into a compliant flat entrance doorset?

We fit certified FD30S doorsets with intumescent and smoke seals, a self-closing device that closes and latches the door from any angle, fire-tested hinges and a lock or latch covered by the certification. Door viewers, spy holes, letterplates, numerals and security hardware can only be fitted if they are part of the doorset's evidence. Where residents want a letterplate, we use one that is covered by the test evidence or recommend a separate post box.

Each installation includes:

  • Intumescent and smoke seals, threshold set to evidence
  • Resident liaison, photo record and certificate references
  • Self-closer set to close and latch
  • Certified FD30S doorset in timber or composite

Fire door law for Brentwood properties

In Brentwood, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Brentwood building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Where flat entrance fire doors fit in Brentwood

You are most likely to need flat entrance fire doors if you look after sheltered housing, converted houses split into flats or flats above shops. Whatever the building in Brentwood, we survey each opening and tell you which doors need work and which do not.

Our process in Brentwood

  1. Survey each flat door and agree access with residents
  2. Confirm specification, finish and hardware with the client
  3. Order certified doorsets made to measure
  4. Remove the old door and frame with minimal disruption
  5. Install, seal, adjust and test the new doorset
  6. Hand over evidence and resident guidance

Prices for flat entrance fire doors in Brentwood

Guide pricing for flat entrance fire doors: £1,200–£2,400 per certified flat entrance doorset supplied and fitted, ex VAT. Volume work across several doors in one Brentwood building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Nearby areas we cover from Brentwood

Brentwood is about 29.7 km from Southend-on-Sea, and we cover both, along with nearby Billericay and Hornchurch. Send us your postcode and we'll confirm survey dates.

Common questions

Is Brentwood within your coverage area?

It is. We cover Brentwood in Essex and neighbouring towns such as Billericay. There is no charge for the survey.

Can you work from an existing inspection report for my Brentwood building?

Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.

Can a flat door have a letterbox?

Only if the letterplate is covered by the doorset's test evidence. A standard letterplate cut into a fire door breaks the rating. Many managing agents choose external post boxes instead.

How long does a flat door replacement take?

Typically half a day per door, with the flat secure at the end of the visit. We agree access times with residents in advance and keep the corridor clear while we work.

Talk to us about Brentwood

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote