What fire exit doors in Bath should include
For property owners, landlords and managing agents in Bath, we offer fire exit doors with one team for the survey, the product and the installation.
Buildings in and around Bath range from offices to converted period houses and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Shops, warehouses and schools in Bath each need exit hardware matched to who will use the door in an emergency. Before quoting for an exit door in Bath, we check whether it needs fire resistance, so you only pay for what the strategy requires.
Is every fire exit door a fire door?
Not necessarily. A final exit door leading straight outside often does not need fire resistance, but it must open easily in the direction of escape and be secure the rest of the time. If the exit door also sits in a wall that the fire strategy requires to resist fire, it needs to be a certified fire doorset as well. We check which applies before quoting, so you do not pay for fire resistance you do not need, or miss it where you do.
On a typical job that means:
- Outside access devices and alarmed options
- BS EN 1125 panic hardware or BS EN 179 emergency hardware
- Weather and threshold detailing
- Assessment of whether fire resistance is required
The regulations behind fire doors in Bath
In Bath, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Bath building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs fire exit doors in Bath?
You are most likely to need fire exit doors if you look after offices, warehouses or shops. Whatever the building in Bath, we survey each opening and tell you which doors need work and which do not.
How a Bath job runs
- Check the fire strategy and who uses the exit
- Select door type, rating and exit hardware
- Order doorset and hardware set
- Remove the existing door and prepare the opening
- Install, seal and weather the doorset
- Test exit operation, closers and security features
What does fire exit doors cost in Bath?
Guide pricing for fire exit doors: £1,100–£2,600 per exit doorset with hardware, supplied and fitted, ex VAT. Volume work across several doors in one Bath building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Bath
As well as Bath, we cover neighbouring towns including Trowbridge, Kingswood and Mangotsfield. The survey and quote are free.
Questions
Do you cover BA1 and nearby postcodes?
Yes. We cover Bath including BA1, and nearby towns such as Trowbridge and Kingswood. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do fire exit doors need closers?
Final exit doors often have closers for security and weather reasons. If the exit door is also a fire door, a closer is normally required to keep it shut.
Do fire exit doors have to open outwards?
Exit doors generally open in the direction of escape, especially where many people use them. Your fire strategy or risk assessment sets the requirement for each door.