Fire exit doors in Market Harborough: what's involved
From the LE16 postcode district outwards, we take on fire exit doors across Market Harborough for homes, blocks and workplaces.
Market Harborough has a broad mix of buildings, including schools, small blocks of flats and small offices, and the same fire door principles apply to all of them.
Shops, warehouses and schools in Market Harborough each need exit hardware matched to who will use the door in an emergency. Before quoting for an exit door in Market Harborough, we check whether it needs fire resistance, so you only pay for what the strategy requires.
Security without blocking escape
Exit doors need to keep intruders out while letting people out in seconds. We can fit outside access devices, alarmed hardware and access control interfaces that do not stop the door being opened from inside. Any of these on a fire-rated exit door must be covered by its evidence.
Each installation includes:
- BS EN 1125 panic hardware or BS EN 179 emergency hardware
- Weather and threshold detailing
- Assessment of whether fire resistance is required
- Single and double exit doors in steel or timber
Which fire door rules apply in Market Harborough?
The rules that apply to fire doors in Market Harborough are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Market Harborough block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire exit doors in Market Harborough?
Landlords, managing agents, facilities teams and homeowners in Market Harborough can all commission fire exit doors from us. The usual settings are hospitality venues and shops, though single doors for offices are just as welcome.
The steps on a Market Harborough installation
- Check the fire strategy and who uses the exit
- Select door type, rating and exit hardware
- Order doorset and hardware set
- Remove the existing door and prepare the opening
- Install, seal and weather the doorset
- Test exit operation, closers and security features
Guide prices in Market Harborough
Guide pricing for fire exit doors: £1,100–£2,600 per exit doorset with hardware, supplied and fitted, ex VAT. Volume work across several doors in one Market Harborough building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Covering Market Harborough and nearby
We also cover towns near Market Harborough, including Corby (15.8 km away), Kettering and Wigston. If your building is in LE16 or a neighbouring district, the service and pricing are the same.
Questions
Do you work in Market Harborough?
Yes, we take on fire exit doors in Market Harborough and the surrounding area, including Corby and Kettering. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Market Harborough?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire exit doors need closers?
Final exit doors often have closers for security and weather reasons. If the exit door is also a fire door, a closer is normally required to keep it shut.
Do fire exit doors have to open outwards?
Exit doors generally open in the direction of escape, especially where many people use them. Your fire strategy or risk assessment sets the requirement for each door.