Certified fire doorsets in Taunton, done to the evidence
If you need certified fire doorsets in Taunton, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Taunton range from houses with integral garages to care homes and high-street shops. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Doorsets suit refurbishment programmes in Taunton, where several openings can be measured, ordered and fitted in one planned sequence. Every doorset we fit in Taunton is handed over with its certificate reference and photographs of the frame fixing and gap sealing.
What does third-party certification mean?
Third-party certification means an independent body has checked the product's test evidence and audits the factory that makes it. Certified products carry a label or plug on the door edge and a certificate you can check. Buyers often look for schemes such as BWF Certifire or BM TRADA Q-Mark when choosing products. Our guide to certified doorsets explains how to read the label and certificate.
What you get:
- Pre-hung, pre-machined doorsets where available
- Closer set-up and close-and-latch testing
- Installation to the manufacturer's instructions
- Certificate references and photo record per opening
Rules and responsibilities in Taunton
The rules that apply to fire doors in Taunton are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Taunton block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Taunton
From schools and offices to blocks of flats, the requirement for certified fire doorsets in Taunton comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
What happens after you enquire
- Survey and measure every structural opening
- Specify doorsets by rating, size, hand, finish and hardware
- Prepare openings and remove existing doors and linings
- Fix and seal the frames to the structure
- Hang, adjust and test each leaf and closer
- Fit architraves, make good and hand over evidence
Guide prices in Taunton
If you need a budget figure first, the guide for certified fire doorsets is £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Taunton
Neighbouring towns such as Bridgwater, Burnham-on-Sea, Tiverton and Yeovil are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you cover TA1 and nearby postcodes?
Yes. We cover Taunton including TA1, and nearby towns such as Bridgwater and Burnham-on-Sea. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Are doorsets more expensive than a leaf?
The product costs more, but the labour is often lower and the result is better evidenced. Where a frame would need replacing anyway, a doorset is usually the better value.
Do doorsets come painted?
They can be supplied primed, factory painted, veneered, laminated or with a composite skin, depending on the product. Factory finishes avoid painting over seals and labels on site.