Certified fire doorsets in Wickford

Certified fire doorsets in Wickford: what's involved

If you need certified fire doorsets in Wickford, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Buildings in and around Wickford range from family homes after loft conversions to houses with integral garages and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Every doorset we fit in Wickford is handed over with its certificate reference and photographs of the frame fixing and gap sealing. Doorsets suit refurbishment programmes in Wickford, where several openings can be measured, ordered and fitted in one planned sequence.

Why choose a doorset over a door leaf?

A fire door's rating belongs to the assembly that was tested, not to the leaf on its own. When a certified leaf is hung in an old frame with mismatched hinges and seals, nobody can say with confidence how it will perform. A doorset arrives with the frame, gaps and ironmongery already matched, so the installer's job is to fix it correctly into the opening and seal it to the structure.

Doorsets also cut time on site, which matters in occupied buildings: less cutting, less dust and fewer return visits.

As standard, the work covers:

• Installation to the manufacturer's instructions
• Frame fixing and frame-to-wall gap sealing
• Closer set-up and close-and-latch testing
• Doorset selection to rating, size and use

Fire door law for Wickford properties

Fire doors in Wickford fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Wickford above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Wickford

Typical settings for certified fire doorsets include blocks of flats, refurbishment programmes and new-build and conversion projects. In Wickford, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

From enquiry to handover in Wickford

1. Survey and measure every structural opening
2. Specify doorsets by rating, size, hand, finish and hardware
3. Prepare openings and remove existing doors and linings
4. Fix and seal the frames to the structure
5. Hang, adjust and test each leaf and closer
6. Fit architraves, make good and hand over evidence

What does certified fire doorsets cost in Wickford?

Budget around £650–£1,300 for an FD30 doorset and £850–£1,800 for FD60, supplied and fitted, ex VAT for certified fire doorsets. Our guide prices are the same in Wickford as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Around Wickford

Wickford is about 15.5 km from Southend-on-Sea, and we cover both, along with nearby Pitsea and Rayleigh. Send us your postcode and we'll confirm survey dates.

Questions