Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

Fire door repairs and remedial works in Ramsgate

Fixing gaps, seals, hinges, closers and damage within the door's certification after an inspection. Free survey in Ramsgate and door-by-door pricing.

Quote in Ramsgate

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

Fire door repairs and remedial works: our service in Ramsgate

Looking for fire door repairs and remedial works in Ramsgate? We supply and fit certified fire doors and components across Ramsgate and the wider Kent area, working from a free survey and a fixed written quote.

Ramsgate has a broad mix of buildings, including family homes after loft conversions, care homes and small blocks of flats, and the same fire door principles apply to all of them.

Send us the inspection report for your Ramsgate building and we will price the remedial actions line by line. Many repairs in Ramsgate can be completed in a single visit once matching components are on site.

Working from your inspection report

Send us your inspection report or fire risk assessment actions. We price each defect line by line, carry out the work, and return a record of what was done to each door, with before and after photographs, so you can close the actions off.

What you get:

  • Line-by-line pricing from your inspection report
  • Hinge, screw and latch repairs
  • Re-glazing to the original system
  • Before-and-after photos per door

The regulations behind fire doors in Ramsgate

Fire doors in Ramsgate fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Ramsgate above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Where fire door repairs and remedial works fit in Ramsgate

You are most likely to need fire door repairs and remedial works if you look after care homes, offices or HMOs. Whatever the building in Ramsgate, we survey each opening and tell you which doors need work and which do not.

The steps on a Ramsgate installation

  1. Review the inspection report or survey defects
  2. Price each action and confirm priorities
  3. Order matching components
  4. Carry out repairs door by door
  5. Test closing, latching and gaps
  6. Return a completed actions record

What does fire door repairs and remedial works cost in Ramsgate?

As a guide, budget from £75 per door for typical remedials, minimum visit from £195, ex VAT for fire door repairs and remedial works. The figure for your Ramsgate building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Covering Ramsgate and nearby

We also cover towns near Ramsgate, including Broadstairs (3.0 km away), Margate and Deal. If your building is in CT11 or a neighbouring district, the service and pricing are the same.

Questions from Ramsgate

Do you work in Ramsgate?

Yes, we take on fire door repairs and remedial works in Ramsgate and the surrounding area, including Broadstairs and Margate. Send your postcode and a few details and we'll come back with survey dates.

What happens on a survey in Ramsgate?

We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.

Can I paint over intumescent strips?

Painting over smoke seals stops them working, and heavy paint can affect intumescent strips. Damaged or painted seals should be replaced with the specified type.

Do you use original manufacturer parts?

We use components that match the door's certification, which is often the manufacturer's own parts or products listed in its evidence.

Get a fixed quote in Ramsgate

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote